ALL SURFACES INCLUDING LINERS
DESCRIPTION :
STOP FUITES seals small leaks in concrete, polyester, liner, acrylic and tiled pools, as well as in in-ground pipe joints.
STOP FUITES is a fluid product, composed of alkaline salts.
STOP FUITES treats leaks of the order of 0.2 m³ to 0.8 m³ over 24H with 1L of product, for pools of 30 m³ to 60 m³. For very large leaks, more extensive operations will be required.
STOP FUITES is compatible with pools treated with bleach or hydrogen peroxide. After using STOP FUITES, wait 24 hours before allowing swimming.
Caution: do not use STOP FUITES in pools treated with bromine or in fine-jet spas. Do not use in pools containing fish.
DIRECTIONS FOR USE:
Pool or pond water temperature should be between 10°C and 30°C.
Water pH should be close to 7 to 7.5.
Stop the filtration pump.Remove automatic pool cleaner.
Set filter valve to “bypass” or “recirculation” position.
Use 1L per 30 m³ to 60 m³, depending on the leak.
Apply the product as close as possible to the leak.
For leaks in PVC or plastic pipes, pour STOP FUITES into the skimmers.
This will allow the product to sink slowly into the pipes, so that it acts more quickly.
Wait 30 min, then switch the circulation pump back on.
Leave the pump running for a minimum of 8 hours and up to a maximum of 24 hours.
Restart filtration 24 hours after adding product. A second application may be necessary.
STOP FUITEScan be used on non-hard polyester pools. The dose remains 1L for 30 m³ to 60 m³.
Wait 24 hours before allowing swimming.
PRECAUTIONS FOR USE :
Product for professional use. Consult the MSDS (only upon request).
PACKAGINGS :
■ Case 4x5L
■ Jerrycans : 20 - 30L
■ Drums : 30L-60L-210L
The information present in our notices, letters and minutes are here to advise you, reporting in particular on tests carried out with a constant concern of objectivity but without any commitment on our part.