SOLAR CLEAN
€0.00
Reference:
CLEANER FOR PHOTOVOLTAIC PANELS
PROPERTIES :
Specific cleaning degreaser for glass plates made of photovoltaic cells. It does not affect rubbers, varnishes, paint, anodized or non-anodized aluminum glass, as well as all metals. It is an ininflammable product, so it allows the cleaning of still hot surfaces. It is a product that is applied using a foam gun system to dissolve dirt more easily. Product to be rinsed easily and does not leave traces after rinsing with demineralized water. It is an economical product used between 3 and 7% diluted in water (either tap water or demineralised water).
INSTRUCTIONS FOR USE :
Use diluted with demineralised water at a rate of 3 to 7%.With 1 liter of diluted product, the treated area is about 10 m2.Apply with a foam gun system. Allow the foam to work for about 10to 20 minutes, and then rinse the surfaces with demineralised waterat a pressure of 30 to 50 bar.
PRECAUTIONS FOR USE AND STORAGE :
Product that causes serious eye irritation. Call a POISON CONTROL CENTER or a doctor if you feel unwell and dizzy. Wear protective gloves and eye-protection equipment. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if the injured person wears some and if they can be easily removed. Continue to rinse. If eye irritation persists: CONSULT A DOCTOR. Keep out of reach of children. Product for professional use. Consult the MSDS (Only upon request).
TRANSPORT :
Product not subject to transport regulation.
PACKAGING :
■ Boxes 4x5L
■ Drums 20L - 30L
■ Containers 210L
The details contained in our instructions, letters and reports are for information purposes only, based on our research trials ad are true to the best of our knowledge. We do not claim any liability fot their contents.
16 other products in the same category:
CLEANER FOR PHOTOVOLTAIC PANELS
PROPERTIES :
Specific cleaning degreaser for glass plates made of photovoltaic cells. It does not affect rubbers, varnishes, paint, anodized or non-anodized aluminum glass, as well as all metals. It is an ininflammable product, so it allows the cleaning of still hot surfaces. It is a product that is applied using a foam gun system to dissolve dirt more easily. Product to be rinsed easily and does not leave traces after rinsing with demineralized water. It is an economical product used between 3 and 7% diluted in water (either tap water or demineralised water).
INSTRUCTIONS FOR USE :
Use diluted with demineralised water at a rate of 3 to 7%.With 1 liter of diluted product, the treated area is about 10 m2.Apply with a foam gun system. Allow the foam to work for about 10to 20 minutes, and then rinse the surfaces with demineralised waterat a pressure of 30 to 50 bar.
PRECAUTIONS FOR USE AND STORAGE :
Product that causes serious eye irritation. Call a POISON CONTROL CENTER or a doctor if you feel unwell and dizzy. Wear protective gloves and eye-protection equipment. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if the injured person wears some and if they can be easily removed. Continue to rinse. If eye irritation persists: CONSULT A DOCTOR. Keep out of reach of children. Product for professional use. Consult the MSDS (Only upon request).
TRANSPORT :
Product not subject to transport regulation.
PACKAGING :
■ Boxes 4x5L
■ Drums 20L - 30L
■ Containers 210L
The details contained in our instructions, letters and reports are for information purposes only, based on our research trials ad are true to the best of our knowledge. We do not claim any liability fot their contents.