2 D BETON
GREASE REMOVER, CEMENT STRIPPER FOR CONSTRUCTION AND PUBLIC WORKS
2D BETON is a new-generation formula developed in compliance with the current legislation. It is a very efficient formula
to remove cement, concrete, storage-and-release mould residues. 2D BETON does not contain hydrochloric, phosphoric or citric acid, which means it is a less aggressive, non-corrosive formula
that promotes safe use. 2D BETON also comes in gel form to facilitate stripping on vertical walls.
FIELDS OF APPLICATION
For the maintenance of all construction and public working equipment in contact with cement and/or concrete, including trucks, readymixers, shoring, refuse trucks, loader buckets, formwork and timber.
This is a powerful stripper that can be used on all supports. 2D BETON does not damage spray equipment. Non-flammable formula.
Use 1 litre of the product pure for 6 to 10 m2. Perform a preliminary test. Do not dilute the product and do not mix it with other products. Spray evenly using a low-pressure sprayer over the entire surface to be treated. Perform the procedure once or twice depending on the thickness to be stripped. Leave on. Rinse the surface well with a high-pressure cleaner. Clean your material and your protective equipment after each use. For maximum efficiency, use the product when temperature is between 5°C and 30°C.
pH : 2.5
Store in a dry area, in temperature between 5 and 30°C. Keep for 24 months in its original packaging, closed, from the time of the manufacture date.
Wear the appropriate protection equipment. Use 2D BETON outdoors Hand projection: Wear protective gloves. Eye protection: Wear goggles during transfer. If ingested: Seek medical attention and bring the product container.
The details contained in our instructions, letters and reports are for information purposes only, based on our research trials ad are true to the best of our knowledge. We do not claim any liability fot their contents.