POLYCOL is a revolutionary one-component mastic used in industry, and more particularly in the automotive industry for gluing windscreens.
Formula free of solvents, halogens, silicones and isocyanates. Odorless. The vehicle is available quickly after the installation of a windscreen: drying time = 1 hour without airbag, 2 hours with one airbag, 3 hours with two airbags. Polymerization obtained with the humidity of the air and surfaces: mastic resistant to all seasons (temperatures from - 40 C° to + 90 C°). It does not yellow when exposed to UV rays.
Operating temperature: from -5 C° to + 35C°. Cleaning: Use only our POLYCOL DEGREASER.
Clean thoroughly the surfaces to be glued. We recommend that you work in heated rooms, mainly for metal surfaces. It is essential to apply a coat of POLYCOL DEGREASER and allow it to dry for about 5 minutes.
POLYCOL is to be applied in strips, in the necessary quantity, between the materials to be glued. Short method: repeat the process on the old cord. Long method: When there is no longer an old cord, sand the surface and degrease it with POLYCOL DEGREASER. Installation of the windscreen within 10 minutes.
PRECAUTIONS FOR USE:
• Product for professional use. Consult MSDS (upon request only).
Case of 12 cartridges
The information contained in our notices, letters, reports and minutes is intended to advise you on tests carried out with a constant concern for objectivity but without any commitment on our part.